El Presidente (Lower Barrel) Closed End Mandrel

Item #: CE7

Price: $26.99

Low Stock

	Add to Wishlist

Share This

Tube Sizes: 31/64"

This mandrel was developed to help facilitate the creation of closed-end El Presidente pens. Everything needed is contained into one unit so that there are no parts that can become lost with normal use. A three jawed chuck, Jacobs chuck or similar tool is required to support this mandrel.To use: Slip the pen blank with brass tube already installed over the expanding shaft up to the bushing. Using a 3/8" open end wrench in the tightening flats, tighten the nut with a 7/16" wrench just enough to keep the blank/tube from rotating. Insert the entire unit into your chuck, tighten the chuck and turn away. You may use your tailstock for additional support.
El Presidente (Lower Barrel) Closed End Mandrel Extra Bushing

Code: CEB7

Price: $4.95