El Grande/Churchill (Cap - Upper Barrel) Closed End Mandrel

    El Grande/Churchill (Cap - Upper Barrel) Closed End Mandrel

    Item #: CE4
    Price: $29.99
    Sold Out- Coming in Soon!

    Out of Stock
    El Grande/Churchill (Cap - Upper Barrel) Closed End Mandrel
    Your Email

    0 reviews | Write a review

    Wishlist Add to Wishlist
    Share This
    Tube Sizes: 33/64"
    • This mandrel was developed to help facilitate the creation of closed-end (cap - upper barrel) El Grande and Churchill pens. Everything needed is contained into one unit so that there are no parts that can become lost with normal use. A three jawed chuck, Jacobs chuck or similar tool is required to support this mandrel.To use: Slip the pen blank with brass tube already installed over the expanding shaft up to the bushing. Using a 3/8" open end wrench in the tightening flats, tighten the nut with a 7/16" wrench just enough to keep the blank/tube from rotating. Insert the entire unit into your chuck, tighten the chuck and turn away. You may use your tailstock for additional support.