|
3D Resin Bottle Stoppers
Please read the
Shipping Terms & Information page before ordering.
| Now here is an
item that is totally awesome! Ed Davidson (www.yoyospin.com)
has created a whole new line of resin bottle stopper blocks
that are unlike anything previously offered anywhere.
There might be an air bubble on or below a petal but the
bubble looks just like a drop of dew!
The delicate roses embedded in the resin
blocks are made from porcelain. The colored base
enhances the color of the rose as well as hiding the threads
of the bottle stopper. These blocks measure
approximately 1 5/8" dia. x 2 1/4" long.
More color combinations are forthcoming. |
Video:
Learn
to turn the 3D Resin Bottle Stoppers
|
Note:
The
drill bit size called out in Ed's tutorial is 23/64". I
recommend either the 5/16" or the 11/32" drill bit. |
| |
Precautions to be observed when turning any acrylic:
-
Use very sharp tools while turning
and take light cuts.
-
Wear face and eye protection and keep
observers away from the turning area.
-
DO NOT turn at excessive speeds.
|
All of the
fabulous stoppers pictured below
were made and photographed by Ed
Davidson.
Additional
stoppers
Know anyone in the Red Hat Society?
These stoppers are very popular with some of their members!
Please note: These stoppers are not endorsed by nor
sanctioned by the Red Hat Society.
To learn more about the Red Hat Society go to the
following link:
The Red Hat
Society
Military 3D
Bottle Stoppers
 |
 |
| U.S. Air Force |
| Base color:
Light Blue |
| $6.75 |
|
Click here to
order |
|
| U.S. Army |
| Base color:
Gold |
| $6.75 |
|
Click here to
order |
|
|
|
|
 |
 |
| U.S. Coast
Guard |
| Base color:
White |
| $6.75 |
|
Click here to
order |
|
| U.S. Marine
Corps |
| Base color:
Deep Red |
| $6.75 |
|
Click here to
order |
|
|
|
|
 |
 |
| U.S. Navy |
| Base color:
Navy Blue |
| $6.75 |
|
Click here to
order |
|
| U.S. Navy
Construction Battalion "Seabees" |
| Base color:
Dark Navy Blue |
| $9.00 each for
either style |
| Click here to
order
CB1 or
CB2 |
|
Video:
Learn to
turn the 3D Resin Bottle Stoppers
|
Note:
The
drill bit size called out in Ed's tutorial is 23/64". I
recommend either the 5/16" or the 11/32" drill bit. |
Tooling to make the
creation of these stoppers a little easier
when using the BHW-465, 466, 467 and 468 series bottle stoppers (as pictured
above)
Bottle Stopper Kits
Bottle Stopper Mandrel
AZSBSM-01 $7.99
The collar acts as a bushing for the proper sizing to match the bottle
stopper.
Click Here To Order
11/32" Norseman TM Drill Bit
$5.65
Click Here To Order
Drill Chuck
We now carry a heavy duty 1/2" drill chuck and arbor to hold the
different
bottle stopper mandrels. This chuck can also be used for many other
projects as well.
Click here to order the drill chuck with #2MT arbor.
Price is $36.95
Click Here to order the
drill chuck with a #1MT arbor.
Price is $36.95
We also stock 3/8"-16 bottom taps for those who would rather drill and tap
(thread) a hole instead
of just forcing the bottle stopper block onto the mandrel. The tap requires
a 5/16" drilled hole.
3/8"-16 Norseman Bottom Tap $3.95
Large Tapping Handle $9.50
5/16" Norseman Drill Bit $4.49
Bottle
Stopper Buffing Handle
| Have you ever had the
sad experience of having a finished bottle stopper blank get
'caught & thrown' by a buffing wheel? Using our Delrin
handle will give you a much more secure way of buffing the
stoppers and not having to worry about dodging a run-a-way
stopper block. The handle is 7" long and comes
complete with two Delrin bushings for shallow or deep
3/8"-16 threads. This handle will work with the BHW-465,
-466, -467, -468 and the -469 series stoppers. Cost of
the handle and two spacers is $11.35.
Click Here To Order |
Tooling to make the
creation of these stoppers a little easier when using the
BHW-450, 451, and 452 Premium double 'O' ring
series bottle stoppers....
Double 'O' Ring Bottle
Stopper Kits
Bottle Stopper Mandrel
This mandrel works on both the all-chrome (BHW-45X series) and
the cork & chrome
(BHW-46X series) stoppers
only
| Drill a 6mm hole into the stopper
blank, screw in the threaded end of the mandrel into the blank, insert
the smooth (round) end of the mandrel into a 3 jawed chuck, Jacobs
drill chuck, et. and turn away. The threads of the mandrel match the
threads on both the all-chrome and cork & chrome stoppers. |
Mandrel: $5.00
Click Here to Order
6mm Norseman TM drill bit: $2.99
Click Here to Order
Drill Chuck
We now carry a heavy duty 1/2" drill chuck and arbor to hold the
different
bottle stopper mandrels. This chuck can also be used for many other
projects as well.
Price is $36.95
Click here to order the drill chuck with #2MT arbor
Click Here to order the
drill chuck with a #1MT arbor
| We also stock 1/4"-20 bottom
taps for those who would rather drill and tap
(thread) a hole instead of just forcing the
bottle stopper block onto the mandrel. The
tap requires a #7 drill bit |
1/4"-20 Norseman Bottom Tap $3.50
#7 Drill Bit $2.79
(for use with the 1/4"-20 bottom tap)
Small Tapping Handle $5.95
Will not work with the 3/8"
tap.
Precautions to be observed when turning any acrylic:
-
Use very sharp tools while turning
and take light cuts.
-
Wear face and eye protection and keep
observers away from the turning area.
-
DO NOT turn at excessive speeds.
|
Please read the
Shipping Terms & Information page before ordering.
|
